Create Your Own Decal Mix Pack! 22.5″x12″

$25.00

Upload Your 22.5″x12″ Image file full of any images you want to print at any size you like!
Maximize your Space you could even print a logo as small as your fingernail! Fill up the empty space!
Print tiny text/logos and make custom pens, lighters, thumb drives, cups and mugs, you can now brand ANYTHING
This makes is much easier for you to create custom personalized gifts for clients, employees or family!
anywhere else you would have to print a large quanity of stickers of a single image. This allows you to print even someones name in a fancy typfaced image or graphic just once for that special gift personalized gift that carries your brand.

Categories: ,

For Maximum Sharpness, Clean edges and quality decal your file should be between 300 and 150 DPI, we do not verifiy the quality of your images before print.
Alterertinitly, You can also Upload a "VECTOR" file and if all the images within are true vector for perfect quality and sharpness

VECTOR IMAGE FILES ARE ALWAYS RECOMENDED FOR MAXIMUM QUALITY AND SHARPNESS
VECTOR images are made from lines, curves and shapes calculated from math so they are always perfect resolution at any size even as large as a building VS
Raster made from tiny squares and quality is dependant on how many "dots" per inch, (DPI) this is why we want more then 150 little squares tiny per inch so they become as small of a "dot" as possible.

Don't Want to mess around with graphics programs? No problem We can do it for you!
If you would like us to prep and create your image file for you HERE

Our UV DECALS are printed on a sheet/roll and you will have to cut them out yourself You can cut as close to the image as required without effecting the decal or the ablity to stick it anywhere.

APPLICATION INSTRUCTIONS
How to Apply Your Decal:
1. Cut the decal out from your sheet of decals
2. Clean the surface your going to apply the logo to, make sure theres no dirt or debris on the surface.
2. Peel off the back plastic sheet from the logo, it will become sticky do not touch the decal but you can touch the sticky clear plastic around the logo as much as you like.
3. Apply the logo to the surface and rub your finger over it to make sure its stuck well.
4. Remove the Front Plastic Piece.
5. Rub your finger over the decal once more to make sure its completely stuck and water cant get behind it.

Note:
When covering a surface with many decals that touch each other make sure the front facing sticky plastic does not stick to other decals when appling your new decal. Cover exsisting decals with paper or the backing piece of your logo to insure you dont damage the other decals on your surface when removing the front plastic from the decal your currently installing. If this is not possible you can contour cut around your decal so theres not much clear front plastic left around the decal to further insure it doesnt lift any other decals when your removing it.